Author Archives: Paul Barnes-Hoggett

FlexUnit UI factory

By Paul Barnes-Hoggett | Published: June 16, 2006

When I started looking into how we could use flexunit in our CI build, I was struck by how the UI is closely linked to the actual running of the test suite. I really wanted to be able to use the supplied flexunit GUI out of the box – after all, it does everything the […]

Posted in Flash & Actionscript, Test Driven Development | Comments closed

FlexUnit for Cruise Control – XML output

By Paul Barnes-Hoggett | Published: June 16, 2006

If you read my earlier posts on Flex and continuous integration, you will remember that we had to do some work to get ASUnit to spit out its results in a manner that would be understood by Cruise Control. We built a log parser to parse results from the Flash players trace file into an […]

Posted in Continuous Integration, Flash & Actionscript, Test Driven Development | Comments closed

Asyncronous test setup with FlexUnit

By Paul Barnes-Hoggett | Published: June 15, 2006

As part of my evaluation of FlexUnit and ASUnit for continuous integration, one of the rquirements is the ability to have an asynchronous test setup. Lets say you have a class under test that requires some XML in its constructor, and ideally you want to load that XML from an external source. While this doesnt […]

Posted in Flash & Actionscript, Test Driven Development | Comments closed

Unit test frameworks for AS3 and Continuous Integration

By Paul Barnes-Hoggett | Published: June 15, 2006

Im currently evaluating FlexUnit and ASUnit as we move over to AS3 and seeing how they will fit in with our continuous integration suite. As you may have read in my previous posts on CI, we ended up significantly reworking ASUnit to get it to integrate with our needs for CI. What we are really […]

Posted in Continuous Integration, Flash & Actionscript, Test Driven Development | 1 Response

Continuous Integration with Flex – Part 6

By Paul Barnes-Hoggett | Published: May 31, 2006

In this, the final entry on CI with Flex, I look at an extra change we made to the ASUnit sources, take a look at what CI has done for us, and finally let you in on what we are looking at next…

Posted in Continuous Integration, Flash & Actionscript | Comments closed

Continuous Integration with Flex – Part 5

By Paul Barnes-Hoggett | Published: May 31, 2006

This is the penultimate installment of the CI saga, and its the last step you will need to take to get your continuous integration suite up and running. The first thing you will need to do is install CruiseControl onto your build monitoring machine. The first thing I did was get it up and running […]

Posted in Continuous Integration, Flash & Actionscript | Comments closed

Continuous Integration with Flex – Part 4

By Paul Barnes-Hoggett | Published: May 29, 2006

Ok, so far so good. We had covered a lot of ground up to this point, but we were only part of the way there… The next step is to get our test results understood by ANT. Ikezi created a natty python script to parse the output of our flash logfile using some cunning regular […]

Posted in Continuous Integration, Flash & Actionscript | Comments closed

Continuous Integration with Flex – Part 3

By Paul Barnes-Hoggett | Published: May 29, 2006

So, if you have got this far, your ant build will compile the test harness, which quits after a specified period of time, and then compiles the main build. So far, so good, but it’s not really rocking yet; what we now need to do is get our ANT build to know if our unit […]

Posted in Continuous Integration, Flash & Actionscript | Comments closed

Continuous Integration with Flex – Part 2

By Paul Barnes-Hoggett | Published: May 29, 2006

In the next step to CI Nirvana, I’m going to be looking at using ANT to build both our testHarness and the main mxml file. As I mentioned in my previous post, the job we need ANT to do is get it to compile the testHarness, wait for it to close, then compile your main […]

Posted in Continuous Integration, Flash & Actionscript | Comments closed

Continuous Integration with Flex – Part 1

By Paul Barnes-Hoggett | Published: May 27, 2006

The first step for getting your CI build up and running will be to get all your basic pieces in place on your local machine. Some of this stuff (I hope) you will already have in place, but for the sake of being complete I’ll include it here…

Posted in Continuous Integration, Flash & Actionscript | Comments closed